How to Connect Speakers to PC : So that you can get the most out of your computer, we tell you how to connect speakers to listen to music, play games or watch movies like in the cinema.
Although the latest computers have built-in speakers from the factory, they are usually not of great quality. It happens with both notebooks and desktop options. To enjoy the better Sound, a good option is to use accessories. Learn how to connect speakers to the PC and take your listening experience to another level.
How to Connect Speakers to PC Step by Step
The procedure to connect speakers to the PC is very simple, whether you do it with cables or opt for the Bluetooth option (if your machine enables it, of course). Once you do, you will see how rewarding the experience is of listening to the music you like with more power and better quality.
Steps to Connect Speakers to PC:
There are different types of speakers on the market, but general recommendations apply to the vast majority of devices.
Step 1:
Depending on the PC speaker model you have purchased, you will have one, two or three speakers (one of which is the central buffer). Those with more than one speaker come with an analogue audio connecting cable that connects them. What you should do in this case is link them together using that cable.
One of the speakers will have the cable, and the other will have a female socket to insert the connector.
Step 2:
Speakers that are powered come with a power cord. In that case, you should plug them into a household outlet. Another option is that they come with a USB cable connected to a port on the PC, which will be enough to power the speakers. If they come with an HDMI cable, we are already talking about superior sound quality and different installation.
Step 3:
Look at the sound card output on the back of your computer. There you will find a series of small, round, colour-coded plugs. The one that connects the speakers is usually green. It may also be marked with a headphone or microphone symbol or even labelled “Audio Out.”
Step 4:
Now you have to link the speakers in that rear socket of the PC. To do this, place the audio connector in the corresponding socket and press firmly. Be careful not to push too hard if you run into any resistance, as that socket is connected to the sound card on the computer’s motherboard, and trying too hard could damage it, especially if it is a PC for gamers.
Step 5:
I turn on the computer and the speakers and then adjust the volume. Your PC is likely to set to play a melody when the speakers are turned on. If you listen to it, then you know that the speakers are on and working. If nothing is heard, proceed to the next step.
Step 6:
What happens is that the computer must recognize the addition of speakers to your system and, only then will it respond accordingly.
A window may appear saying “New driver detected” and that you run a brief setup process. You will need to click “Yes” to allow it to make the appropriate changes.
Step 7:
If this does not happen, you will have to find a way to manually configure the new sound equipment, entering the volume settings of your PC.
If you use Windows, click on the “Start” menu and then go to “Settings.”
Once there, you must enter “System” and then click on “Sound. There you must choose the sound output system, marking the name of the speakers you are connecting.
Also, check that the overall volume is not low. Finally, you have to test the Sound again.
Connect Bluetooth Speaker to PC
If the audio equipment you purchased can link via Bluetooth with your computer, you have a very practical way to listen to music without the need for cables crossing the space.
We tell you how to connect your speaker to the PC via Bluetooth.
The first thing you have to do is activate the Bluetooth connection in the speakers and verify that it can be detected by other equipment. Making this happen depends on the device (you can check the user manual or the manufacturer’s website).
Now activate Bluetooth on your PC. To do this, select the Start button and then click on “Settings”> “Devices”.
- Once there, a new window will open. The first line is for “Bluetooth and other devices.” Check that the speakers appear in the list of devices to pair. If they are not, click on the button that says Deactivated and check that it is blue. It should say “Enabled.”
4. To finish, in the activity center, select “Connect”. A list with the devices will appear. Find your speakers and click Connect. This will pair your audio device with your computer.
